Can A Pool Table Moving Service Relocate It Without Taking It Apart?

Moving a billiard table is a large chore, but it has to be done from time to time, whether you're moving or just changing things around in your area. There's a lot that goes into dismantling and reassembling a pool table. With the aid of many people and furniture sliders, you can move it to a short distance without dismantling it, but it may cause damage to the table and necessitate realigning the bumpers and re-levelling the slate. We advise that you use specialists from pool table moving service in Perth.

Even though it is technically feasible, moving game equipment without dismantling it or hiring an expert is not recommended. We'll go through the hazards of transporting the table without dismantling it and the risks of doing it yourself in this post so you can determine if it's worth it.

What happens when you try to move a billiard table without dismantling it?
With enough assisting hands, you can move a table without taking it apart, but it isn't good for the table. Let's look at how transporting a pool table without disassembling it might harm it—

·         If you're carrying the slate, the weight will be held mostly by the frame. The frame may be damaged or go out of alignment as a result of this.

·         When a three-piece slate is used, the slate might shift when the table is moved, causing the seams to become misaligned.

·         You'll need to re-level the table eventually. If you have a one-piece slate, you can level it yourself. But, if you have a three-piece slate, you may need to hire a professional (and you'll have to disassemble the table anyhow).

·         The slate could be scratched. This is especially true for slates that are one-piece.

·         The weight of the table will require the assistance of multiple individuals. Lifting the hefty pool table might injure one of your workers or you.

We recommend hiring a qualified pool table mover because there is a risk of breaking the table. Also, there is the chance that you will need to have the table levelled by a professional anyhow.

Can you dismantle the table and move it by yourself?

If you're making an attempt to save money, you can disassemble the pool table and relocate it without too much difficulty. However, moving the slate and frame would still need the assistance of two or three people. A pool table is never moved by one person.
Make sure you're placing everything in the appropriate spot before you start. Even though it is less expensive, we do not advocate dismantling a pool table and relocating it yourself. Let's look at the disadvantages of doing it yourself.

A three-piece slate table always requires professional assistance

When it comes to reassembling, a three-piece slate pool table demands the expertise of pool table movers in Perth. The three slate pieces must be levelled individually before being connected with beeswax.
If you don't know how to do it (which most of us don't), you'll have to employ someone to help you. It could be worth it to just have them complete the entire work at this point.

One-piece slate is quite heavy

Because one-piece slate is so hefty, most pool tables are manufactured using a three-piece slate. You'll need a team to lift this beast from the table and transport it to its final destination. It will be difficult to get it past doors and down corridors. It's also more prone to break during the relocation.

You might break the slate

The last thing you want to do is shatter your pool table's slate, and simply disassembling the table might cause the slate to be damaged. Replacement slate is costly. Even if one of the three slate pieces on your table is broken, you'll need to replace them all since the slate should all originate from the same piece and line up properly.

In conclusion

We can say that doing the work by yourself can save you money. But it can damage your billiard table as well. It's best to hire professional billiard table movers from Slipstream Carriers, as we know what to do.